The Layouts and colors help to clarify the Folder structure of the mixing session. Notice that the above image shows tracks that are colorized and utilize two different track Layout styles. Also, check that Multichannel metering is enabled on your track by right-clicking on the track (not the level meter itself), and select Multichannel track metering: If not, check that your track routing settings specify the correct number of channels (see Track Routing). Play your audio to make sure you see the correct number of audio channels metered in your track. Note the visibility of individual channel levels: This example shows 2 Folder track structures, one with a 4-channel signal path, another with a 16-channel signal path. Wide Meter: meters made as wide as possible for viewing many channels in a track.Tall: similar to the default track layout, with unnecessary controls stripped out and a taller level meter, or.Now that you have the right theme (this will persist through Reaper restarts), right-click on a track-or select multiple tracks to change a group of tracks-then right-click, select Set Track Layout>Mixer Panel>MultiChan Mix - *. If you're not already on the MultiChanMix theme, switch to that theme: This is the same as the default theme, but with these extra track layout options added. These layouts are available in the MultiChanMix theme, which you can download here. We have specifically designed Mixer track layouts that you may find useful for multichannel mixing. And for multichannel mixing projects, there are a number of controls that aren't needed, such as phase, panning, trim, input routing, and record controls. The default Mixer track layouts aren't very well suited for monitoring multichannel audio. Hardware Outputs: Send audio for this track directly out to specific hardware channels, with the same controls as a track send.Īfter enabling your the correct number of Track channels, play your audio to make sure you see the correct number of audio channels metered in your track.Adding a receive to a target track is identical to adding the send to the source track. You can modify the receive settings, which in turn modify the send settings from the source track. Receives from other tracks: Displays what other tracks are being sent to the present track.Sends to other tracks: Send the output from this track to other tracks, Pre- or Post-fader, Pre- or Post-FX, with independent send level to each send.Panning/Width values: Best not to use these for multichannel audio.Track Volume: Convenient for setting a specific dB value, instead of just using the track fader.Master/parent send: Dis/Enables through routing to the Master track, or Folder track in the case that the track is in a folder.You'll notice from the above image that the Routing window exposes various additional track controls, including: To Top Track Routing, Channel Count, Sends, Receives You can also send a subset of the channels to the hardware. Be sure to check that you're sending all of your track channels to your hardware. You can add multiple hardware sends, adjust their send levels, mute them, and delete them. Whether you're using the Master track, a Folder track or normal tracks to audition submixes or various decodes, the routing setup is the same:Ī dialog will open with various track settings, but for hardware setting, just look at the lower left dropdown. (More on this in Folders and Decoder Tracks below.) * Recommended * Individual tracks and Folder tracks have the advantage of a bit more routing flexibility and, importantly, rendering flexibility for high channel counts.A typical strategy is to mix through the Master track to route your output mix (decode) to your speakers or headphones Reaper is arranged to support this paradigm.There are a couple different approaches to to sending your mix (decode) out to your speakers: Next, you'll need to get audio routed to your hardware. Select Menu>Track>Insert New Track, or Command+T to add your first track and begin setting up your channel count and routing.See Menu>Options>Snap/grid to en/disable the grid display or snapping, or set more advanced snap and grid settings in the Snap/Grid settings.Right click the timeline "ruler" above the track window and select the time notations you want.Some of the first things you'll want to set are: Track Routing, Channel Count, Sends, Receives.DXARTS: Digital Arts & Experimental Media.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |